Sampling by Variables

William A. Levinson
May 26, 2021 - 03:00 PM
Starting at


Buy Now

Why should you attend?

ANSI/ASQ Z1.9 (formerly MIL-STD 414) is an acceptance sampling standard for product characteristics that are measured in terms of real numbers. While the textbook approach is very straightforward, users need to be aware of considerations such as (1) the assumption that the data follow the normal or bell curve distribution and (2) switching rules for normal, tightened, and reduced inspection. This presentation will cover the basics of ANSI/ASQ Z1.9 along with these other considerations. The handout for the presentation will meanwhile include a technical appendix that shows where the operating characteristic (OC) curves in the standard comes from.

Areas Covered in the Session:

1.       Introduction to ANSI/ASQ Z1.9, formerly MIL-STD 414. (The examples in the webinar will use the public domain tables from MIL-STD 414 as opposed to the copyrighted ones in ANSI/ASQ Z1.9; the procedures are however identical.) It is vital to realize that the entire standard relies on the assumption that the quality characteristic follows the normal or bell curve distribution.

·         Other considerations include the need for random sampling, i.e. each item has an equal chance of being measured, and the need for the items to come from (as an example) a lot that has been subjected to homogenous processing conditions.

2.       The sampling plan depends on (1) the lot size, (2) the level of inspection, and (3) the acceptable quality level (AQL) at which it is desirable to accept most (roughly 95%) of the lots.

·         Switching rules meanwhile dictate normal, tightened, or reduced inspection.

·         Plans depend on whether the standard deviation is known or must be inferred from the sample statistics.

·         Plans also depend on whether we are dealing with a 2-sided or 1-sided specification, and whether the (1) known standard deviation, (2) sample standard deviation, or (3) sample range is used to infer the variation. In addition, when there are two specification limits with separate AQLs, it is possible to use ANSI/ASQ Z1.9 regardless.

·         When the sample range is used, it is vital to note that average ranges (e.g. the average of two ranges for groups of 5 from a specified sample size of 10) are used as opposed to the range of the entire specified sample (e.g. the range of the 10 measurements). If the sample size is 15, then the average of 3 ranges for groups of 5 would be used similarly.

3.       The nonconforming fraction can be estimated from the sample statistics, and the technical appendix shows how this is done.

4.       The technical appendix gives additional detail that is not found in the standard, including development of the OC curves from the noncentral t distribution (which is available in StatGraphics and other statistical software packages).

Attendees will receive a handout of the slides and accompanying notes, including the technical appendix.

Who will benefit:

Quality managers, engineers, and technicians, and others with responsibility for acceptance sampling activities

Webinar Events
Attend Live Webinar
May 26, 2021 - 03:00 PM

Duration: 60 Minutes

Single Attendee

Group of 3 to 5 +1 Thumb Drive or 5 online Recorded version

Group of 6 to 10 +1 Thumb Drive or 10 online Recorded version

Training CD-DVD

Physical CD-DVD of recorded session will be despatched after 72 hrs on completion of payment

Recorded video

Recorded video session

Speaker: William A. Levinson,

William A. Levinson, P.E., is the principal of Levinson Productivity Systems, P.C. He is an ASQ Fellow, Certified Quality Engineer, Quality Auditor, Quality Manager, Reliability Engineer, and Six Sigma Black Belt. He is also the author of numerous books on quality, productivity, and management.

Follow us

24x7 Direct Number
(315) 632-0735,
(315) 750-4379
Toll Free