2-Day Virtual Seminar Lifecycle Management of Analytical Methods and Procedures according to new USP and ICH Guidelines


Starting at

$1699


Buy Now

Results of analytical methods are used as the basis for important decisions during development and manufacturing of pharmaceutical products. All regulatory agencies expect the regulated industry to have procedures in place to ensure suitable levels of reliability, accuracy and precision of such methods. The procedures should cover lifecycle phases from design, development, validation to on-going routine use.

Managing analytical methods and procedures according to the lifecycle approach has been recommended in recent FDA guidance documents and stimuli articles published by the USP. For example, the recent FDA guidance “Analytical Procedures and Methods Validation for Drugs and Biologics” contains a section on Lifecycle Management of Analytical Procedures.

This 2-day workshop will explain the background to the new Analytical Procedure Lifecycle guidelines and give attendees the knowledge needed to implement recommended approaches. Interactive exercises will be included in the workshop.

Learning Objectives:

  • Learn about the regulatory background and recommendations for managing the lifecycle of analytical methods and procedures
  • Understand current and future industry trends: the concept of lifecycle management of analytical methods, recent ICH guidance (ICH Q12), proposed USP General Chapter <1220> (Analytical Procedure Lifecycle) and Quality by Design (QbD) principles for method development and validation
  • Learn how to plan, execute and document design, development and validation of methods developed in-house
  • Understand the principles of lifecycle management for compendial procedures and for managing method transfer
  • Be able to develop a strategy for analytical procedure lifecycle management
  • Understand risk management strategies throughout the procedure lifecycle
  • Understand the concept of measurement uncertainty
  • Be able to justify and document decisions about type and extend of revalidation after method changes
  • Be able to define and demonstrate FDA, EU, USP and ICH compliance to auditors and inspectors
  • Be able to develop inspection-ready documentation during on-going routine operation
  • Understand what questions will be asked during audits and inspections and how to answer them

Who Will Benefit:

  • QA managers and personnel
  • Quality control scientists
  • Method development scientists
  • Analytical chemists
  • Validation specialists
  • Laboratory managers and supervisors
  • Regulatory affairs professionals
  • Training departments
  • Documentation departments
  • Consultants
DAY 01(10:00 AM - 5:00 PM EDT)
  • 10.00 AM - Session Start
  • Introductions and Agenda Review Lectures
  • Lecture 1 - Regulatory background and guidance
    • The importance of analytical procedures
    • Introduction to lifecycle management of analytical methods
    • USP approach for lifecycle management: proposed General Chapter 1220
    • Learnings from the new FDA, WHO, and PDA method validation guidelines
    • Linking the procedure lifecycle to the quality system
    • The importance of risk management (ICH Q9)
    • Lessons from recent FDA Warning Letters
    • Recommendations for risk-based implementation
  • Lecture 2 - The 2015 FDA Method Validation guidance
    • Scope and regulatory status
    • Recommendations for integrated procedure lifecycle
    • Expectations for quality risk assessment, Quality by Design (QbD), Multivariate experiments, system suitability testing, statistics, knowledge management
    • Equipment operational qualification and trend analysis
    • Revalidation vs. ongoing evaluation
  • Lecture 3 - Preparing your laboratory for compliant validation studies
    • Analytical Instrument qualification
    • 21 CFR Part 11/Annex 11 compliance of computer systems
    • Validation of chromatographic data systems
    • Validation and control of Excel spreadsheets
    • Qualification of reference standards and materials
  • Lecture 4 - The lifecycle overview on integrated method development, validation, and ongoing performance verification
    • Advantages of the new approach
    • Key steps for design, development, validation and ongoing performance verification
    • Integrated lifecycle and QbD: similarities, differences
    • Regulatory status of the new approach
    • Integrating method transfer and compendial method verification
    • Application of risk management through the life cycle
DAY 02(10:00 AM - 5:00 PM EDT)

  • Lecture 5 - The analytical target profile
    • Comparison with the scope of current methods
    • Advantages and limitations of the ATP approach
    • Introduction to measurement uncertainty
    • Target measurement uncertainty (TMU)
    • Considerations for establishing an ATP
    • Incorporating current USP, ICH, and FDA guidance into the ATP
    • Constructing an ATP for existing methods
  • Lecture 6 - Procedure design and development
    • Knowledge gathering: what and how
    • Risk management: assessment, evaluation, and control
    • Analytical control strategy
    • Typical control examples
    • Illustration of controls using Ishikawa (fishbone) diagrams
    • Knowledge management as an important factor in ensuring the acquiring, analyzing, storing, and dissemination of information
  • Lecture 7 - Procedure Performance Qualification (Validation)
    • Developing a validation/qualification plan and SOP
    • ICH Q2 validation and test parameters:
    • Accuracy, precision, intermediate precision, specificity, LOD, LOQ, linearity, range, robustness
    • Examples for design and execution of test experiments
    • Examples of application-specific acceptance criteria
    • Evaluation of test results: using statistical models
  • Lecture 8 - Ongoing Performance Verification
    • The objective of ongoing performance verification
    • Monitoring method performance: system suitability testing and quality control samples
    • Handling of method changes vs. permitted adjustments
    • Revalidation of analytical methods: when, what to test
    • Handling of out-of-expectation results
    • Continuous improvements
Seminar (Price/Register)
Seminar Fee Includes:
Lunch
AM-PM Tea/Coffee
Seminar Material
Attendance Certificate
$100 Gift Cert for next seminar

Other Registration Option
  1. Download the Order Form
  2. Fill this form with attendee details & payment details
  3. Fax your PO to 1-888-883-7697 or,
  4. Email it to cs@compliance.world

Payment Mode

By Check -

Pay your check issued from the payee to "Redstone Learning Inc." (Our Parent Company) and mail the check to –
Compliance.world (Redstone Learning Inc.)
1180 Avenue of the Americas,
8th Floor, New York,
NY 10036

  Media Partners

If you wish to partner with us for this event

please contact us: partner or
call us: 1-866-978-0800

Media Partner Benefits

  • Logo and company data on the event website.
  • Logo on the conference material distributed during the conference.
  • Media Partner’s brochure distributed along with conference material.
  • Logo on all the mailings before and after the event.
  • 10% discount to media partner's subscribers.

Media Partner to do

  • Banner (min 728x90 or 468x60) on the Media Partner website.
  • Insertion of the event in the event calendar, both printed and/or online.
  • Announcement article of the conference on the Magazine and/or Website.
  • Dedicated email blast to all subscribers of Media Partner.
  • Article on the Magazine and/or Website after the conference.

  Sponsors

If you wish to partner with us for this event

please contact us: sponsor@compliance.world or
call us: 1-866-978-0800

Follow us

24x7 Direct Number
(315) 632-0735,
(315) 750-4379
Toll Free
1-866-978-0800

Fax

1-888-883-7697